Jump to content

  • Chat
  •  
  •  

Welcome to Formiculture.com!

This is a website for anyone interested in Myrmecology and all aspects of finding, keeping, and studying ants. The site and forum are free to use. Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation points to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

Photo

Anecdotal review of byFormica Formisazine Ant Assist in a sterile laboratory environment

byformica formisazine

  • This topic is locked This topic is locked
3 replies to this topic

#1 Offline Cameron C. Thomas - Posted May 19 2017 - 4:01 PM

Cameron C. Thomas

    Advanced Member

  • Members
  • PipPipPip
  • 101 posts
  • LocationVancouver, Washington
Before I begin this review, let me state the following caveats:
 
  1. This is an anecdotal review. It is not meant to be read or used as a systematic analysis of Formisazine Ant Assist vs. plain water or other media. We do not have the time nor desire to conduct a systematic study, and our review may only apply to our specific laboratory conditions.
  2. As of this writing, I am aware byFormica has issued a recall notice for Formisazine Ant Assist which directly addresses one—and may correct other—issues we ran into using this formulation.
  3. I am aware the owner of byFormica is a member of this community. I do not personally know the manufacturer or employees of the company, and I was not solicited for this review.
  4. The phrase ‘sterile laboratory environment’ means we use sterilized equipment and make every effort to prevent contamination. Our glassware is autoclaved at 121 °C for 15 minutes, we use sterile cotton for founding tubes, and we always wear disposable nitrile gloves when handling colonies.
    1. That said, ants and their food are certainly not sterile. Some ants are messier and more prone to mold growth than others. In nature, mold growth in ant nests may be deterred by feeding from microbiota or other organisms not present in sterile conditions. As a hobbyist, I would advise introducing beneficial symbiotic organisms to abate mold issues. In the laboratory, we must control as many variables as possible, which means this is often not an option; therefore, a product like Formisazine Ant Assist could be an ideal solution.
 
We replaced plain water with byFormica Formisazine Ant Assist in founding tubes and active colonies of several species six weeks prior to this review. We also filled several unused founding tubes with this formulation for observation. Last week, we began noting initial results of the replacement. The most striking observation was a change in color from initial application. The color of the formulation changed from sky blue to green in all our test tubes as seen below.
 
FReview1

 

Since the solution changed in in our unused founding tubes as well, we did not immediately suspect mold was the cause of this change. We realized shortly after the color of the unused Formisazine had also changed. The pictures below show, from left to right, an unused founding tube, the bottle of unused Formisazine, and a new pour from the bottle. We do not know if this color change is indicative of an alteration in the chemical composition of the formulation.
 
FReview2

 

Relative to the manufacturer’s claim of mold resistance, our sense is that there isn’t an easily observable difference between the use of Formisazine Ant Assist and plain water. The yellowing pictured below is commonly seen in our colonies after a period of time. Both tubes contain Formisazine Ant Assist.
 
FReview3

 

We note that mold usually develops in our plain water test tubes between four and six months when it occurs. Approximately one third of test tubes treated with Formisazine used as both founding tubes and for active colonies developed some sort of mold [seen below] after six weeks of use. 
 
FReview4

 

I will, again, stress this is not a systematic evaluation of the product, and these numbers represent anecdotal observation from our use in the lab.
 
By far, the most problematic observation during our use of Formisazine in the lab was excessive drying of the ant-exposed side of the cotton pictured below.
 
FReview5

 

This occurred in all test tubes containing Formisazine, including the ones which developed mold. This is not an issue we have ever noted when using plain water and cotton.
 
FReview6

 

At this point, we believe ants in these tubes no longer have access to the water source, which is detrimental for survival of adults and development of immature stages. We do not know why we are observing this, but we speculate a possible cause may be crystallization of some component of the formulation on the drying edge, creating a barrier between the exposed edge and solution and cascading as the layer thickens over time. Another example of this phenomenon is the drying of fabric covered in salt water.
 
The results of our observations are not typical of byFormica products we have used in the past. As of this writing, all our colonies obtain their carbohydrate load from byFormica Sunburst Ant Nectar using Galileo Liquid Ant Feeders, and we’ve been quite satisfied with the results. We look forward to improvements in the Formisazine formulation and hope this review has been helpful to all readers.

Edited by Cameron C. Thomas, May 19 2017 - 4:17 PM.

  • Reacker, GXF, Martialis and 1 other like this

#2 Offline Martialis - Posted May 19 2017 - 4:09 PM

Martialis

    Advanced Member

  • Members
  • PipPipPip
  • 1,516 posts
  • LocationMississippi

I feel this review, anecdotal as it is, is the evidence some members were looking for a while back. This is an unbiased, scientific evaluation of a product which has had some controversy. There was no bashing or ill-speaking of anyone and it even points out the successes of other byFormica products as will as Formazine's success in diminishing mold in 2/3 of test tubes.

 

I believe that byFormica will now probably revise their product to address the problems described. Good job.


Edited by Martialis, May 19 2017 - 4:10 PM.

  • ctantkeeper, Nathant2131 and Cameron C. Thomas like this
Spoiler

#3 Offline drtrmiller - Posted May 19 2017 - 4:21 PM

drtrmiller

    Vendor

  • Members
  • PipPipPip
  • 2,714 posts
Thanks for your detailed analysis.

As noted in the email you received, the fix for all these issues is in the process of being validated. Because most problems in test tube environments occur after some weeks, and the blue food dye was a last-minute addition to the original formulation, it will take some time to verify the updated formulation will remain problem-free.

In short, a chelating agent will resolve the discoloration issue with the dye, while additional parabens and quaternary ammonium compounds will have synergistic effects to inhibit fungal growth more so than methylparaben and sodium benzoate.

Once the updated formulation is finalized, I'm hoping to provide details on testing methods that were not offered originally. For example, to accelerate the development time, I'm using agar plates inoculated with organisms found in test tubes inhabited by ants. It's important that the fluid be drinkable and ant-safe as well, so it is tested alongside tap and distilled water in liquid feeders to measure receptivity.

As I attempted to explain in prior discussions, a product that accomplishes the goals of eliminating mold in test tubes while also being safe for ants is not as simple as combining two ingredients. There's quite a lot of research that goes into it; and so while I am disappointed that the original product run did not go as planned, I do look forward to providing a satisfactory solution that addresses your concerns and meets or exceeds customer expectations.

Edited by drtrmiller, May 19 2017 - 5:20 PM.

  • Reacker, Kevin, Martialis and 3 others like this


byFormica® is the manufacturer of the iconic nectar feeders and Sunburst Ant Nectar.
byFormica ant products always deliver consistent performance, convenience,
and reliability, making them among the most beloved ant foods and kit enjoyed by
ant keeping enthusiasts worldwide. For more information, visit www.byFormica.com.

#4 Offline drtrmiller - Posted July 19 2017 - 8:46 AM

drtrmiller

    Vendor

  • Members
  • PipPipPip
  • 2,714 posts
Because this product is undergoing many changes from the initial release, I'm archiving this review.


byFormica® is the manufacturer of the iconic nectar feeders and Sunburst Ant Nectar.
byFormica ant products always deliver consistent performance, convenience,
and reliability, making them among the most beloved ant foods and kit enjoyed by
ant keeping enthusiasts worldwide. For more information, visit www.byFormica.com.





Also tagged with one or more of these keywords: byformica, formisazine

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users