Jump to content

  • Chat
  •  
  •  

Welcome to Formiculture.com!

This is a website for anyone interested in Myrmecology and all aspects of finding, keeping, and studying ants. The site and forum are free to use. Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation points to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

Photo

Pinning Ants For Viewing Under Microscope?


  • Please log in to reply
28 replies to this topic

#1 Offline Gregory2455 - Posted December 26 2014 - 12:56 AM

Gregory2455

    Advanced Member

  • Members
  • PipPipPip
  • 3,286 posts
  • LocationCalifornia

Can anyone show me how to do this? I have not the slightest clue on what to do after preserving specimens in alcohol... :(



#2 Offline James C. Trager - Posted December 26 2014 - 8:18 AM

James C. Trager

    Expert

  • Moderators
  • PipPipPip
  • 374 posts

Ant should be left side away from the pin. This one is right side outward, though. Especially when handling large numbers of specimens, as taxonomists do, it is quite inconvenient when specimens are mounted differently form the standard pose and orientation. 


Edited by James C. Trager, April 3 2015 - 1:31 PM.


#3 Offline dspdrew - Posted December 26 2014 - 8:44 AM

dspdrew
  • LocationSanta Ana, CA

Yeah this was one I had in the wrong direction before I knew the correct way to mount them.



#4 Offline MrILoveTheAnts - Posted December 26 2014 - 9:08 AM

MrILoveTheAnts

    Advanced Member

  • Members
  • PipPipPip
  • 240 posts

Pinning

There is a special hole punch tool used to punch out small wedges on archival paper. It's helpful to have the hole punched through it before hand and this is easily done on a small slice of balsam wood. The needle should pass right through, except for the occasional hard spot. Corkboard might also work.

 

Tweezers should be sharp but don't have to be the super expensive kind.

 

Your ant should be placed on its back, If you are right handed (as in coming in from the right) you want the head aimed down, as seen in the photo above. If you are left handed then the head should be aimed upward. Moving the legs, mandibles and antenna should have been done prior to this. Woodglue or clear nail polish are both acceptable glues to use here. You want to press the tip of the paper between either the first two or last two sets of legs, depending on if your ant is front or rear heavy.

 

Your ant should look something like this when it's done.

 

Labels

On a lot of ants you'll see labels with them written in small font (sometimes even typed). Between one or two lables you'll usually see location data and some sort of code. These usually coresponds to a notebook the collector wrote in while collecting the ant.

 

Some codes break down differently but the ones I used are thus. My first two initials, The last two digits in the year, The number that specimen was taken that year (in ascending order of course) and either a C or S for Collected from a colony, or found as a Stray ant somewhere. 

 

Storage

Rule number one, Don't eat them! Sadly a fleet of other bugs will be trying to do that for you and they will consume everything, even to the most dried out specamins that haven't seen the light of day in years. Mothballs should be placed in every container to discourage such insects from establishing a breeding ground in your collection.


  • Gregory2455 and Jonathan21700 like this

#5 Offline Gregory2455 - Posted December 26 2014 - 1:11 PM

Gregory2455

    Advanced Member

  • Members
  • PipPipPip
  • 3,286 posts
  • LocationCalifornia
That answers about everything! Where can you get these "special hole punch tools"?

#6 Offline dspdrew - Posted December 26 2014 - 1:27 PM

dspdrew
  • LocationSanta Ana, CA

This is what I do after taking the specimen out of the alcohol to dry. It's easier to position them while the joints still work and things are still flexible. Once dry it stays in the position I want it in.

 

gallery_2_137_73794.jpg



#7 Offline MrILoveTheAnts - Posted December 26 2014 - 1:43 PM

MrILoveTheAnts

    Advanced Member

  • Members
  • PipPipPip
  • 240 posts

I believe it's called a Point Maker or Point Punch. It's just like a hole puncher but it makes little triangles instead of holes. Or you could just cut out little wedges with scissors.


Edited by MrILoveTheAnts, December 26 2014 - 1:47 PM.


#8 Offline Gregory2455 - Posted December 26 2014 - 2:04 PM

Gregory2455

    Advanced Member

  • Members
  • PipPipPip
  • 3,286 posts
  • LocationCalifornia
Anyone have a link to it? I searched both with no luck...

#9 Offline dspdrew - Posted December 26 2014 - 2:34 PM

dspdrew
  • LocationSanta Ana, CA

I just cut mine with scissors, but here. http://www.bioquip.c...t.asp?pid=1161A



#10 Offline dspdrew - Posted December 26 2014 - 2:48 PM

dspdrew
  • LocationSanta Ana, CA

Here (http://mississippien...htm#.VJ3lQkA7DA) is some good information on all of this.



#11 Offline Gregory2455 - Posted December 26 2014 - 3:19 PM

Gregory2455

    Advanced Member

  • Members
  • PipPipPip
  • 3,286 posts
  • LocationCalifornia

I just cut mine with scissors, but here. http://www.bioquip.c...t.asp?pid=1161A

Wow, that is expensive! I am just going to cut my own.

 

Onto another question, is there a specific type of paper that these points need to be made with?



#12 Offline Gregory2455 - Posted December 26 2014 - 4:21 PM

Gregory2455

    Advanced Member

  • Members
  • PipPipPip
  • 3,286 posts
  • LocationCalifornia

Also, what kind of pins should be used?



#13 Offline dspdrew - Posted December 26 2014 - 4:43 PM

dspdrew
  • LocationSanta Ana, CA

 

I just cut mine with scissors, but here. http://www.bioquip.c...t.asp?pid=1161A

Wow, that is expensive! I am just going to cut my own.

 

Onto another question, is there a specific type of paper that these points need to be made with?

 

 

I just use black constuction paper. Cardstock is what most use I think.

 

 

Also, what kind of pins should be used?

 

These are what I use.

 

BioQuip Insect Pins, Black, #000, 100/Pack

BioQuip Insect Pins, Black, #3, 100/Pack



#14 Offline Gregory2455 - Posted December 26 2014 - 4:49 PM

Gregory2455

    Advanced Member

  • Members
  • PipPipPip
  • 3,286 posts
  • LocationCalifornia

What is the difference between #000 and #3?



#15 Offline dspdrew - Posted December 26 2014 - 4:58 PM

dspdrew
  • LocationSanta Ana, CA

#000 are the thinnest. #3 are medium thickness.



#16 Offline Gregory2455 - Posted December 26 2014 - 4:59 PM

Gregory2455

    Advanced Member

  • Members
  • PipPipPip
  • 3,286 posts
  • LocationCalifornia

If I were to get one, which do you suggest?



#17 Offline dspdrew - Posted December 26 2014 - 6:40 PM

dspdrew
  • LocationSanta Ana, CA

#3 is what's commonly used I think.



#18 Offline Gregory2455 - Posted January 19 2015 - 10:41 PM

Gregory2455

    Advanced Member

  • Members
  • PipPipPip
  • 3,286 posts
  • LocationCalifornia

Okay everyone! I have my microscope, my paper triangles, my pins, and my microscope stage! Can someone please tell me what substance binds the ant to the paper triangle???



#19 Offline dspdrew - Posted January 20 2015 - 7:50 AM

dspdrew
  • LocationSanta Ana, CA

I just use fast drying CA glue. Which stage did you get?



#20 Offline Gregory2455 - Posted January 20 2015 - 10:26 AM

Gregory2455

    Advanced Member

  • Members
  • PipPipPip
  • 3,286 posts
  • LocationCalifornia
The Bioquip cork stage. :D




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users