Jump to content

  • Chat
  •  
  •  

Welcome to Formiculture.com!

This is a website for anyone interested in Myrmecology and all aspects of finding, keeping, and studying ants. The site and forum are free to use. Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation points to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

Photo

Dspdrew's Formicarium 05 Research and Design (Updated 11-22-2023)

formicarium container out world enclosure how-to diy design dspdrew nest tutorial

  • Please log in to reply
237 replies to this topic

#141 Offline drtrmiller - Posted January 21 2015 - 11:02 AM

drtrmiller

    Vendor

  • Members
  • PipPipPip
  • 2,714 posts

I suppose it can do both, but you should use a TDS (total dissolved solids) meter to check how much stuff like minerals, gases, and chemicals are in the water before and after it gets cloudy.  

 

It won't tell you what is in the water, but it will tell you whether the cloudiness is just your imagination.  Then you still have to figure out whether the solids are originating from the sponge, the plastic, the hydrostone, etcetera.  

 

All you can say definitely at this point is that adding hydrostone to the floor has a negligible, if any, impact on PH of the water in the reservoir.  You still have no indication as to what is causing the issue.  

 

Only a process of elimination will help solve the case of the missing hydrostone.

 

uc?export=view&id=0B4O2xPb2dcB_MWxyU1JZd


Edited by drtrmiller, January 21 2015 - 11:04 AM.

  • William. T likes this


byFormica® is the manufacturer of the iconic nectar feeders and Sunburst Ant Nectar.
byFormica ant products always deliver consistent performance, convenience,
and reliability, making them among the most beloved ant foods and kit enjoyed by
ant keeping enthusiasts worldwide. For more information, visit www.byFormica.com.

#142 Offline dspdrew - Posted January 21 2015 - 11:10 AM

dspdrew
  • LocationSanta Ana, CA

I suppose it can do both, but you should use a TDS (total dissolved solids) meter to check how much stuff like minerals, gases, and chemicals are in the water before and after it gets cloudy.  

 

It won't tell you what is in the water, but it will tell you whether the cloudiness is just your imagination.  Then you still have to figure out whether the solids are originating from the sponge, the plastic, the hydrostone, etcetera.  

 

All you can say definitely at this point is that adding hydrostone to the floor has a negligible, if any, impact on PH of the water in the reservoir.  You still have no indication as to what is causing the issue.  

 

Only a process of elimination will help solve the case of the missing hydrostone.

 

Haha. Hydrostone is white. But anyways, let me rephrase: The water IS slightly cloudy, and there ARE small particles of what looks like Hydrostone in it.



#143 Offline dspdrew - Posted January 21 2015 - 11:52 PM

dspdrew
  • LocationSanta Ana, CA

I am continuing this Hydrostone 'rosion (Is that better drtrmiller ?  :D ) discussion over on my formicarium #8 thread (http://www.formicult...9-2015/?p=10984) since it's more relevant there.



#144 Offline dspdrew - Posted February 4 2015 - 1:15 AM

dspdrew
  • LocationSanta Ana, CA
I made a few test tiles of cement and Hydrostone to test out not only how much it dissolves, but also the amount of absorption I get out of them. Since this is more relevant to this formicarium, I posted it here.
 
The first one was a mixture of 3 parts Hydrostone, and 1 part cement. The second was 1 part Hydrostone, and 2 parts cement. The third was all cement, but with a chamois embedded in it the entire length.
 
med_gallery_2_281_169899.jpg
 
 
The results were pretty weird. The one with 3 parts Hydrostone and 1 part cement absorbed water up about four inches, while the one with 2 parts cement and only 1 part Hydrostone got completely saturated. If that wasn't weird enough, after a couple days, the first hadn't changed much, other than a few of those gypsum crystals forming on it. The second one, with a way higher cement content, got all swelled up and cracked, and started to curve. When I touched it, I found I could actually crush it in my fingers as if it was made of mud.
 
med_gallery_2_281_36334.jpg
 
 
It also had a lot of those gypsum crystals, and they were yellowish in color.
 
med_gallery_2_281_241950.jpg
 
 
Even though the first one seemed to be working okay, as expected, because of the Hydrostone content, it started to dissolve where it was touching the water. This means I won't be bothering to use any mixture of Hydrostone and cement, or any Hydrostone at all for that matter.
 
The cement with the chamois inside it did exactly what I figured it would do; the entire thing was wet. This means by embedding a chamois or sponge inside cement, you can have total control over the moisture, allowing you to create whatever moisture gradient you want. As long as portland cement turns out to be safe, this now makes it the best material to use for nests in my opinion. Another thing I do still want to try though, is to pour nests using clay slip and have them fired.

#145 Offline Chromerust - Posted February 4 2015 - 6:12 PM

Chromerust

    Advanced Member

  • Members
  • PipPipPip
  • 305 posts
  • Locationsouthern California

I suppose it can do both, but you should use a TDS (total dissolved solids) meter to check how much stuff like minerals, gases, and chemicals are in the water before and after it gets cloudy.


Funny you mention this I have a Digital TDS meter I was going to give Drew
  • dspdrew likes this

#146 Offline Myrmicinae - Posted February 5 2015 - 4:41 PM

Myrmicinae

    Advanced Member

  • Members
  • PipPipPip
  • 274 posts
  • LocationFort Collins, CO

Dspdrew - Where did you manage to find the Ytong, if you don't mind me asking?  I'm sorry if I missed it in an earlier post.

 

Nice designs, by the way. :)


Journals on Formiculture:
Pheidole ceres
Tapinoma sessile

Old YouTube Channel:
ColoradoAnts

#147 Offline dspdrew - Posted February 5 2015 - 5:26 PM

dspdrew
  • LocationSanta Ana, CA

Thanks. I bought it from Mack Pidgen two years ago.



#148 Offline Myrmicinae - Posted February 5 2015 - 5:43 PM

Myrmicinae

    Advanced Member

  • Members
  • PipPipPip
  • 274 posts
  • LocationFort Collins, CO

Thanks. I bought it from Mack Pidgen two years ago.

 

Ah, okay.  Thanks!  I forgot that he sold blocks of it.


Journals on Formiculture:
Pheidole ceres
Tapinoma sessile

Old YouTube Channel:
ColoradoAnts

#149 Offline dspdrew - Posted February 6 2015 - 8:47 AM

dspdrew
  • LocationSanta Ana, CA
For this particular nest design, cement or ceramics will both be way too fragile. Plastic is still the only thing that's going to be strong enough for this, so I decided to look into casting them out of resin. This would allow me to easily give them a nice rough texture, eliminating the slick surface problem with acrylic. For something this small, yet more than a half inch thick, casting it would be much cheaper than getting it laser cut. This of course would eliminate the ability to adjust the depth, but as cheap as it is, I could probably make two whole nests of different depths for the same price anyway. Not having to weld multiple plates of acrylic together will be much easier as well. Using resin also gives you the ability to make it look like almost any material you want.
 
Just to get a little practice at this, I made a silicone mold of my black and white prototype nest since that one didn't have a colony living in it at the moment. I sprayed it with contact adhesive and covered it in fine sand just to see if I could actually replicate this texture with my mold.
 
med_gallery_2_131_602545.jpg
 
med_gallery_2_131_444072.jpg
 
 
The mold came out alright for the small amount of silicone I used. Demolding was very difficult because of the sand, but I managed to do it without breaking anything.
 
After cleaning all the glue and sand off the silicone mold, I poured the resin. I mixed some mineral fillers into the resin to give it a stone look, and just for the heck of it, I added lots of very fine clay dirt, which I suspect had something to do with this not curing properly and leaving it semi-soft in some areas. I think I might have just added too much. Either way, it didn't really matter since this was just for practice.
 
You can see how realistic the texture came out. It looks so real, that if I didn't know, I would think there was actually sand glued to this thing.
 
med_gallery_2_131_391041.jpg
 
med_gallery_2_131_550291.jpg
 
med_gallery_2_131_41313.jpg
  • drtrmiller likes this

#150 Offline kellakk - Posted February 6 2015 - 8:57 AM

kellakk

    Advanced Member

  • Moderators
  • PipPipPip
  • 603 posts
  • LocationSouthern California

That looks very cool!  If this design works out well, I'd definitely buy it just based on how the texture looks!


Current Species:
Camponotus fragilis

Novomessor cockerelli

Pogonomyrmex montanus

Pogonomyrmex rugosus

Manica bradleyi

 

 


#151 Offline dean_k - Posted February 6 2015 - 9:34 AM

dean_k

    Advanced Member

  • Members
  • PipPipPip
  • 845 posts
  • LocationWaterown, Ontario, Canada

Yep, this one looks promising. There is no way the ants are chewing their way out of this one.



#152 Offline drtrmiller - Posted February 6 2015 - 9:49 AM

drtrmiller

    Vendor

  • Members
  • PipPipPip
  • 2,714 posts

That looks very cool!  If this design works out well, I'd definitely buy it just based on how the texture looks!

 

I'll take credit for the inspiration behind it :~P




byFormica® is the manufacturer of the iconic nectar feeders and Sunburst Ant Nectar.
byFormica ant products always deliver consistent performance, convenience,
and reliability, making them among the most beloved ant foods and kit enjoyed by
ant keeping enthusiasts worldwide. For more information, visit www.byFormica.com.

#153 Offline dspdrew - Posted February 6 2015 - 10:31 AM

dspdrew
  • LocationSanta Ana, CA

 

That looks very cool!  If this design works out well, I'd definitely buy it just based on how the texture looks!

 

I'll take credit for the inspiration behind it :~P

 

 

Haha. But the gluing sand to it part was my idea! :P Seriously though, I do hope I don't have go through all that on the mother mold. I haven't looked at all the texture options yet for that website you sent me to the other day.



#154 Offline drtrmiller - Posted February 6 2015 - 10:43 AM

drtrmiller

    Vendor

  • Members
  • PipPipPip
  • 2,714 posts

I was making plastic sand a year ago, sonny boy.




Edited by drtrmiller, February 6 2015 - 10:45 AM.

  • Ants4fun and Rstheant like this


byFormica® is the manufacturer of the iconic nectar feeders and Sunburst Ant Nectar.
byFormica ant products always deliver consistent performance, convenience,
and reliability, making them among the most beloved ant foods and kit enjoyed by
ant keeping enthusiasts worldwide. For more information, visit www.byFormica.com.

#155 Offline dspdrew - Posted February 6 2015 - 11:00 AM

dspdrew
  • LocationSanta Ana, CA

Interesting. What happened with these ideas?



#156 Offline Foogoo - Posted March 18 2015 - 11:28 AM

Foogoo

    Advanced Member

  • Members
  • PipPipPip
  • 1,161 posts
  • LocationLos Angeles, CA

I was making plastic sand a year ago, sonny boy.

:lol:


Camponotus vicinus, Crematogaster 1, Crematogaster 2, Formica francoeuri, *, *, Myrmecocystus testaceus, Novomessor cockerelli, Pheidole hyatti, Pogonomyrmex californicus, Pogonomyrmex rugosus, Solenopsis invicta


#157 Offline drtrmiller - Posted March 20 2015 - 11:42 AM

drtrmiller

    Vendor

  • Members
  • PipPipPip
  • 2,714 posts

I must admit, when I helped Drew conceptualize this design back in October, I didn't realize it would look this good.  Drew has a very good eye for symmetry, balance, and use of space.

 

I customized his rendition of my design of his design, eliminated the hard edges and angles, and then printed this part:

 


Edited by drtrmiller, March 20 2015 - 11:53 AM.



byFormica® is the manufacturer of the iconic nectar feeders and Sunburst Ant Nectar.
byFormica ant products always deliver consistent performance, convenience,
and reliability, making them among the most beloved ant foods and kit enjoyed by
ant keeping enthusiasts worldwide. For more information, visit www.byFormica.com.

#158 Offline Mercutia - Posted March 20 2015 - 11:46 AM

Mercutia

    Advanced Member

  • Members
  • PipPipPip
  • 621 posts
  • LocationToronto, Canada

Miller, I like that one. Send me the file? =D



#159 Offline Crystals - Posted March 20 2015 - 12:31 PM

Crystals

    Advanced Member

  • Moderators
  • PipPipPip
  • 2,048 posts
  • LocationAthabasca, AB (Canada)

Drew, how durable was that silicone mold?

Also, did you make your own silicone mold mix, or buy one?


"Always do right. This will gratify some people, and astound the rest." -- Samuel Clemens

 

List of Handy Links   (pinned in the General section)

My Colonies


#160 Offline dspdrew - Posted March 20 2015 - 12:34 PM

dspdrew
  • LocationSanta Ana, CA

Yeah, I messed with the idea of rounding the corners, and came up with almost the same thing, but I didn't like it. Again, I'm not trying to replicate a natural nest, and doing so actually wastes space.







Also tagged with one or more of these keywords: formicarium, container, out world, enclosure, how-to, diy, design, dspdrew, nest, tutorial

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users