Jump to content

  • Chat
  •  
  •  

Welcome to Formiculture.com!

This is a website for anyone interested in Myrmecology and all aspects of finding, keeping, and studying ants. The site and forum are free to use. Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation points to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

Photo

'The Stump™' (prototype)

ants antz antz for all queen

  • Please log in to reply
21 replies to this topic

#1 Offline SpikeyOls - Posted May 31 2018 - 8:02 AM

SpikeyOls

    Vendor

  • Members
  • PipPipPip
  • 69 posts
  • LocationSouthampton

'The Stump™' (prototype) - New concept product - What do you all think?  :D 

 

Stump1
 
Stump2
 
Stump3
 
Stump4
 
Stump5

 


Edited by SpikeyOls, May 31 2018 - 8:03 AM.

  • ctantkeeper, VoidElecent, rdurham02 and 3 others like this

#2 Offline T.C. - Posted May 31 2018 - 8:10 AM

T.C.

    Advanced Member

  • Members
  • PipPipPip
  • 3,059 posts

Well, it's definetly different, if I where you I'd print it brown, so it resembles a stump more.


  • Barristan and JoshuaM like this

" Whatever You Are, Be a Good One "


#3 Offline SpikeyOls - Posted May 31 2018 - 8:20 AM

SpikeyOls

    Vendor

  • Members
  • PipPipPip
  • 69 posts
  • LocationSouthampton

Well, it's definetly different, if I where you I'd print it brown, so it resembles a stump more.

 

This is just a prototype, the finished product will look more like a stump, with multiple colours in it! :) 



#4 Offline drtrmiller - Posted May 31 2018 - 8:41 AM

drtrmiller

    Vendor

  • Members
  • PipPipPip
  • 2,714 posts

While creative, it looks like a very wasteful and inefficient use of material. The embedded nest's square edges contrast poorly with the organic, free-flowing exterior.


Edited by drtrmiller, May 31 2018 - 8:42 AM.

  • FSTP, FeedTheAnts and Major like this

#5 Offline SpikeyOls - Posted May 31 2018 - 8:50 AM

SpikeyOls

    Vendor

  • Members
  • PipPipPip
  • 69 posts
  • LocationSouthampton

While creative, it looks like a very wasteful and inefficient use of material. The embedded nest's square edges contrast poorly with the organic, free-flowing exterior.

 

Again, this is just a prototype, the edges have just been taken from one of my pre-existing designs, the nest part will have a re-design :) - The product itself is printed at a very low infill rate to reduce un-needed plastic being wasted in the process, it actually doesn't contain much more plastic than one of our larger nests which are printed at a higher infill. :) 


  • drtrmiller, VoidElecent and TennesseeAnts like this

#6 Offline Waganga - Posted May 31 2018 - 9:21 AM

Waganga

    Advanced Member

  • Members
  • PipPipPip
  • 87 posts
  • LocationNorthglenn, Colorado

This is really cool! I like the artistic nature of it.

 

I'm just getting into formicarium making myself, but my medium of choice is handbuilt ceramic. Right now I'm working on a design that resembles a clay slab box with a lid, where the lid can be removed to view the ants in a formicarium inside. I like the idea of having the formicarium be inside a more mundane object like a box, because I think people are naturally curious to see what is inside a jar or box (or anything you can open). So, I really like your stump idea here for the same reason! People will be curious to see what's inside, and surprise, it's ants! 


  • SpikeyOls and VoidElecent like this

#7 Offline Mettcollsuss - Posted May 31 2018 - 1:32 PM

Mettcollsuss

    Advanced Member

  • Members
  • PipPipPip
  • 1,700 posts
  • LocationChicago, IL

Look nice.

 

I have a question, though. How does the hydration work? I mean I know you inject water into the sponge, but how does it get to the ants? Is there a type of filament that soaks up water? Is there a basin of some sort? I would like to know, because I am working on 3-D nests myself and am looking at alternate hydration methods. I don't like hybrid nest-style hydration, because I don't want to disturb the ants too much by lifting their nest to water it.


  • TennesseeAnts likes this

#8 Offline Skwiggledork - Posted May 31 2018 - 2:53 PM

Skwiggledork

    Advanced Member

  • Members
  • PipPipPip
  • 367 posts
  • LocationUlster county, NY

You know what I think would be dope? if it was three(4 technically) separate pieces. The base with an exit to whatever outworld you put the nest in, the nest with an opening in the top and bottom, a plug for the top opening and the cover. The bottom exit would lead to the tunnel in the base allowing them into the outworld. That way you could just print/buy the nest piece and expand the nest upward to give them more nest space. No idea how hydration or telling when your colony needs to expand would work, but I like the idea.


  • DaveJay likes this

#9 Offline SpikeyOls - Posted June 1 2018 - 12:28 AM

SpikeyOls

    Vendor

  • Members
  • PipPipPip
  • 69 posts
  • LocationSouthampton

Look nice.

 

I have a question, though. How does the hydration work? I mean I know you inject water into the sponge, but how does it get to the ants? Is there a type of filament that soaks up water? Is there a basin of some sort? I would like to know, because I am working on 3-D nests myself and am looking at alternate hydration methods. I don't like hybrid nest-style hydration, because I don't want to disturb the ants too much by lifting their nest to water it.

 

This nest has combination hydration, it is designed to evaporate and spread through the nest that way, and the ants can access it directly through a mesh like structure.

 

 

You know what I think would be dope? if it was three(4 technically) separate pieces. The base with an exit to whatever outworld you put the nest in, the nest with an opening in the top and bottom, a plug for the top opening and the cover. The bottom exit would lead to the tunnel in the base allowing them into the outworld. That way you could just print/buy the nest piece and expand the nest upward to give them more nest space. No idea how hydration or telling when your colony needs to expand would work, but I like the idea.

 

That is a very interesting concept - I will keep it in mind :) 


  • Mettcollsuss and Skwiggledork like this

#10 Offline Serafine - Posted June 1 2018 - 12:55 AM

Serafine

    Advanced Member

  • Members
  • PipPipPip
  • 1,782 posts
  • LocationGermany

The hydration chamber looks very very small to me. I'd rather expand it towards the outer edges of the tree and at least quadrubple it in size. Otherwise it's a nice idea although not very space-efficient (but then not every nest has to be as space-efficient as possible, in fact the new AC hybrids are pretty terrible in that regard as well).


We should respect all forms of consciousness. The body is just a vessel, a mere hull.

Welcome to Lazy Tube - My Camponotus Journal


#11 Offline SpikeyOls - Posted June 1 2018 - 1:07 AM

SpikeyOls

    Vendor

  • Members
  • PipPipPip
  • 69 posts
  • LocationSouthampton

The hydration chamber looks very very small to me. I'd rather expand it towards the outer edges of the tree and at least quadrubple it in size. Otherwise it's a nice idea although not very space-efficient (but then not every nest has to be as space-efficient as possible, in fact the new AC hybrids are pretty terrible in that regard as well).

 

The hydration chamber is deep, and has been tested to make sure it was suitable for this size nest, and as I have said, this is just a prototype so it will be redesigned to include larger chambers and thus a larger humidity chamber. - The nest utilises all available space within the useable limits towards the edges of the nest, the rest is printed at a very low infill to make sure that as little as possible material is wasted. :) 


  • Mettcollsuss likes this

#12 Offline CoolColJ - Posted June 3 2018 - 3:16 AM

CoolColJ

    Advanced Member

  • Members
  • PipPipPip
  • 2,646 posts
  • LocationSydney, Australia

If you get a nice hydration system going, that can last a few weeks, I'll be inline for one :)

 

Also with a removeable top for easy cleaning or to get the ants to move out if needed


Edited by CoolColJ, June 3 2018 - 3:17 AM.

  • SpikeyOls likes this

Current ant colonies -
1) Opisthopsis Rufithorax (strobe ant), Melophorus sp2. black and orange, Pheidole species, Pheidole antipodum
Journal = http://www.formicult...ra-iridomyrmex/

Heterotermes cf brevicatena termite pet/feeder journal = http://www.formicult...feeder-journal/


#13 Offline SpikeyOls - Posted June 3 2018 - 8:14 AM

SpikeyOls

    Vendor

  • Members
  • PipPipPip
  • 69 posts
  • LocationSouthampton

If you get a nice hydration system going, that can last a few weeks, I'll be inline for one :)

 

Also with a removeable top for easy cleaning or to get the ants to move out if needed

 

The hydration we are working on, and the acrylic cover is actually removable for cleaning ect - Thank you! :) 



#14 Offline Major - Posted July 22 2018 - 5:21 PM

Major

    Advanced Member

  • Members
  • PipPipPip
  • 588 posts
  • LocationRochester, New York
What if you made the acrylic cover magnetic (Tarheel ants style)?

#15 Offline SpikeyOls - Posted July 22 2018 - 11:34 PM

SpikeyOls

    Vendor

  • Members
  • PipPipPip
  • 69 posts
  • LocationSouthampton

What if you made the acrylic cover magnetic (Tarheel ants style)?

 

The acrylic cover is removable anyway, so I feel that it would just add some unnecessary work to the design - But thank you for the idea! :) 


  • Major likes this

#16 Offline Major - Posted July 23 2018 - 11:18 AM

Major

    Advanced Member

  • Members
  • PipPipPip
  • 588 posts
  • LocationRochester, New York
You have a potential buyer right here! How much will you sell it for once it is out of the prototype stage?
  • SpikeyOls likes this

#17 Offline SpikeyOls - Posted July 23 2018 - 11:42 AM

SpikeyOls

    Vendor

  • Members
  • PipPipPip
  • 69 posts
  • LocationSouthampton

You have a potential buyer right here! How much will you sell it for once it is out of the prototype stage?

 

It is likely to cost between £15 - £20 :) 



#18 Offline Major - Posted July 23 2018 - 11:53 AM

Major

    Advanced Member

  • Members
  • PipPipPip
  • 588 posts
  • LocationRochester, New York
Do you have any idea when it will become available? Dimensions?

#19 Offline SpikeyOls - Posted July 23 2018 - 12:50 PM

SpikeyOls

    Vendor

  • Members
  • PipPipPip
  • 69 posts
  • LocationSouthampton

Do you have any idea when it will become available? Dimensions?

 

Thank you very much for the interest! - It is likely to be available to order/pre-order at the end of this month, or the start of next month! (The dimensions will be posted along with the product) :) 


  • Major likes this

#20 Offline Major - Posted July 23 2018 - 12:53 PM

Major

    Advanced Member

  • Members
  • PipPipPip
  • 588 posts
  • LocationRochester, New York
Ok thanks. I'm just super interested because I have NEVER seen such an interesting formicarium. And for the price? It's a must have. Do you know how much shipping would be to Rochester, NY USA?
  • SpikeyOls likes this





Also tagged with one or more of these keywords: ants, antz, antz for all, queen

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users