Jump to content

  • Chat
  •  
  •  

Welcome to Formiculture.com!

This is a website for anyone interested in Myrmecology and all aspects of finding, keeping, and studying ants. The site and forum are free to use. Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation points to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

Photo

Small Species Housing Problem


  • Please log in to reply
4 replies to this topic

#1 Offline Myrmecologeek - Posted December 11 2013 - 10:26 PM

Myrmecologeek

    Advanced Member

  • Members
  • PipPipPip
  • 38 posts
  • LocationPhilippines

Hello Antlovers! I'd like to share my problem with you guys, and hopefully obtain some insights as well. So, I live in the Philippines, I keep several species of ants of varied sizes. The species I would like to talk about in this post are the smallest I keep at the moment. So here are the species:

Subfamily: Myrmicinae

Monomorium floricola

Subfamily: Dolicherinae

 

Tapinoma melanocephalum
Tapinoma emeryi


My problem lies in the housing. Most of my other ants live in grout/perilite mix nests or Pumice nests but that's only because they are big enough not to get through. However, these tiny species have tiny queens as well so it wouldn't be hard for them to actually slip through tiny holes that I might miss. Now I would like to get some insights on how to house these species. Any help is welcome.


Edited by Myrmecologeek, December 11 2013 - 10:33 PM.


#2 Offline Servercheck - Posted December 11 2013 - 10:58 PM

Servercheck

    Advanced Member

  • Members
  • PipPipPip
  • 67 posts
  • LocationPenang, Malaysia
I've been keeping my previous Pheidole colony in plaster nests. Haven't had any escape except when the barriers were worn out.

The queens were 4mm, minor workers are around 1 or 2 mm while majors are 3 or 4 mm.

A layer of most might help with barrier problems too.

Edited by Servercheck, December 11 2013 - 11:00 PM.


#3 Offline dspdrew - Posted December 12 2013 - 12:08 AM

dspdrew
  • LocationSanta Ana, CA

I'm actually planning to build a few very small formicariums specifically for the tiniest of ants. I just plan to be very precise in my design.



#4 Offline Myrmecologeek - Posted December 12 2013 - 4:47 AM

Myrmecologeek

    Advanced Member

  • Members
  • PipPipPip
  • 38 posts
  • LocationPhilippines

I found that if you paint plaster with actual dirt, it lessens the tendency of the plaster to mold. I will try that on this, hopefully, no escapees. :)



#5 Offline Crystals - Posted December 12 2013 - 8:07 AM

Crystals

    Advanced Member

  • Moderators
  • PipPipPip
  • 2,048 posts
  • LocationAthabasca, AB (Canada)

If you heavily silicone the joint where glass meets grout/nest the chance of them escaping the nest is slim to none.  If you are really worried, you can use 2- part epoxy on the glass and where the tube enters the nest.  If you choose the cheaper, more liquidy epoxies they seep into the tiny cracks and seal them tight.  You can test your nest by pouring it full of water and watch to see if any water drips out.

 

As for the foraging area, I would recommend testing some wild workers to see which barriers are the most successful.  Fluon is supposed to work well, but for some species I have found olive oil works excellent - but some species have no problem taking an olive oil bath...

So I also recommend a tight lid with very fine mesh covering the air holes.  :D


"Always do right. This will gratify some people, and astound the rest." -- Samuel Clemens

 

List of Handy Links   (pinned in the General section)

My Colonies





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users